| Highlights |
|---|
| Typ portu: |
Miedz |
| Layer Type: |
Layer 3 |
| POE Porty: |
UPOE |
| Uplink Ports (fixed): |
4x 10G SFP+ |
| Liczba portów: |
48 |
| Predkosc portu: |
100Mbit/1G/2,5G/5G/10G |
Informacje o produkcie:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 (UPOE) + 4 x 10 Gigabit SFP+ (uplink) |
|
| Power Over Ethernet (PoE): |
UPOE |
|
| PoE Budget: |
675 W |
|
| Performance: |
Switching capacity: 392 Gbps
Switching capacity with stacking: 712 Gbps
Forwarding rate: 291.66 Mpps
Forwarding rate with stacking: 529.76 Mpps |
|
| Capacity: |
IPv4 routes: 32000
IPv6 routes: 16000
Multicast scale: 8000
QoS scale entries: 5120
ACL scale entries: 5120
VLANs supported: 4094
Switched virtual interfaces (SVIs): 1000 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, gRPC, IPv4, IPv6, YANG |
|
| Encryption Algorithm: |
128-bit AES, 256-bit AES |
|
| Features: |
ACL support, QoS, Rapid PVST+, SRR, PXE support, Energy Efficient Ethernet, CoS, FNF, 802.1x authentication, 16MB packet buffer, DSCP support, MACsec support, CoPP, Blue Beacon LED, ZTP, secure boot, PIM, FHS, PVLAN support, CIR, Cisco Trust Anchor module, Cisco UADP 2.0, Cisco StackWise-320 technology |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 1588v2, IEEE 802.1BA, IEEE 802.3bt, Wi-Fi CERTIFIED 6 |
|
| RAM: |
8 GB |
|
| Flash Memory: |
16 GB |
|
| Status Indicators: |
Status |
|
| Expansion / Connectivity |
| Interfaces: |
36 x 1000Base-T RJ-45 60 W
4 x 10GBase-X SFP+ uplink
1 x network stack device
1 x management (LAN) RJ-45
1 x console
1 x USB 2.0
12 x 1/2.5/5/10GBase-T RJ-45 |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
1 |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Provided: |
1100 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Miscellaneous |
| MTBF: |
273,820 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35 |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
4.4 cm |
|
| Height: |
48.8 cm |
|
| Weight: |
7.65 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 90% (non-condensing) |
|
German
English
French
Spanish
Italian
