| Highlights |
|---|
| Typ portu: |
Miedz |
| Layer Type: |
Layer 2 |
| Predkosc portu: |
1G |
| Uplink Ports (fixed): |
4x 10G SFP+ |
| Liczba portów: |
48 |
Informacje o produkcie:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
|
| Performance: |
Throughput: up to 190.5 Mpps
Routing/switching capacity: 256 Gbps |
|
| Capacity: |
Simultaneous VLANs: 4094
IPv4 routing table entries: 32768
IPv6 routing table entries: 16384 |
|
| Jumbo Frame Support: |
9KB |
|
| Routing Protocol: |
RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP |
|
| Encryption Algorithm: |
SSL |
|
| Authentication Method: |
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS |
|
| Features: |
Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, WRR queuing, IPv6 support, sFlow, STP support, RSTP support, VRRP support, MSTP support, PAgP support, ACL support, QoS, CAR, DHCP server, DLDP support, ECMP, STP Root Guard, IPv4 support, LLDP support, Smart Link Pass-Through, dynamic ARP protection, DHCP protection, port isolation, non blocking ports, SP, GARP, IRF technology, OpenFlow support, IP source guard |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az |
|
| RAM: |
2 GB SDRAM |
|
| Flash Memory: |
512 MB |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 1000Base-T RJ-45
4 x 10Gbit LAN SFP+
1 x serial (console)
1 x USB 2.0
1 x management (LAN) RJ-45 |
|
| Expansion Slots: |
1 (total) / 1 (free) x Expansion Slot |
|
| Installed Modules Qty (Max): |
1 (installed) / 1 (max) |
|
| Power |
| Power Device: |
Internal power supply (not installed) |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Miscellaneous |
| Compliant Standards: |
VCCI, EN 61000-3-2, AS/NZS 60950-1, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, ANSI C63.4-2009, EN 60825-2, EN 61000-3-3:2008, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, CISPR 24:2010, EN 55022:2010 Class A, FCC CFR47 Part 15 A, EN 61000-4.4:2012, CAN/CSA-C22.2 No. 60950-1 |
|
| Dimensions & Weight |
| Width: |
44 cm |
|
| Depth: |
36 cm |
|
| Height: |
4.37 cm |
|
| Weight: |
7.5 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
German
English
French
Spanish
Italian
