| Highlights |
|---|
| Typ portu: |
Miedz |
| Layer Type: |
Layer 2 |
| POE Porty: |
POE+ |
| Uplink Ports (fixed): |
4x 10G SFP+ |
| Liczba portów: |
24 |
| Predkosc portu: |
10/100/1000 Mbit/s |
Informacje o produkcie:
| General |
| Device Type: |
Switch - 24 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Front and side to back rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
24 x 10/100/1000 (PoE+) + 4 x 1 Gigabit / 10 Gigabit SFP+ (uplink / stacking) |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| PoE Budget: |
740 W |
|
| Performance: |
Switching capacity: 128 Gbps
Throughput: 95.2 Mpps
Latency (1 Gbps): 2.28 µs
Latency (10 Gbps): 1.46 µs
Stacking bandwidth: 40 Gbps |
|
| Capacity: |
Switched virtual interfaces (SVIs): 128
IPv4 host table capacity: 8000
IPv6 host table capacity: 8000
IPv4 routes (Unicast): 2000
IPv6 routes (Unicast): 2000
IGMP groups: 1000
MLD groups: 1000
IPv4 ACL entries (ingress): 1000
IPv6 ACL entries (ingress): 1000
MAC ACL entries (ingress): 1000
IPv4 ACL entries (egress): 512
IPv6 ACL entries (egress): 256
MAC ACL entries (egress): 512
Packet buffer size: 8 MB |
|
| Jumbo Frame Support: |
9220 bytes |
|
| Routing Protocol: |
STP, IGMPv2, IGMPv3, IGMP, MLD, MSTP, RSTP, OSPF, ECMP, PIM-DM, PIM-SM, VRRP |
|
| Remote Management Protocol: |
RMON, SNMP 3, SNMP 2c, SNMP, SSH, CLI, TFTP, SFTP |
|
| Authentication Method: |
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
MIB, LLDP support, DWRR, auto-uplink (auto MDI/MDI-X), VLAN support, IPv6 support, CoS, QoS, ACL support, DHCP support, MVRP, ToS, VXLAN, NTP, RSTP, PIM, BPDU, MSTP support, RSTP support, STP support, packet storm protection, Aruba VSF, dynamic IPv6 lockdown, ND snooping, sFlow, Syslog support, PVST+, Rapid PVST+ |
|
| Compliant Standards: |
IEEE 802.3af, IEEE 802.3at |
|
| Processor: |
1 x ARM: 1.8 GHz |
|
| RAM: |
8 GB DDR4 SDRAM |
|
| Flash Memory: |
16 GB |
|
| Expansion / Connectivity |
| Interfaces: |
24 x 10/100/1000 Base-T RJ-45 PoE Class 4
4 x Gigabit / 10Gbit LAN SFP+ uplink/stacking
1 x USB-C console
1 x console RJ-45
1 x USB Type A host |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
0 |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Voltage Required: |
AC 100-120/200-240 V (50/60 Hz) |
|
| Miscellaneous |
| Included Accessories: |
Rack kit (2 post) |
|
| Rack Mounting Kit: |
Included |
|
| Compliant Standards: |
EN 62368-1:2014+A11:2017 2nd Ed., EN 62368-1:2020+A11:2020 3rd Ed., BS EN 62368-1:2014 + A11:2017 2nd Ed, BS EN 62368-1:2020 + A11:2020 3rd Ed, UL 62368-1 Third Edition, CSA C22.2 No. 62368-1 Third Edition, IEC 60950-1:2005 + Am1:2009 + Am2:2013, IEC 62368-1:2014 2nd Ed, IEC 62368-1:2018 Third Edition, CNS 15598-1:2020, EN 55032:2015+A11:2020 Class A, EN 55035:2017+A11:2020, EN 61000-3-2:2019, EN 61000-3-3:2013/A1:2019, FCC CFR47 Part 15 B Class A 2014, ICES-003 Class A, VCCI Class A, CISPR 32 Ed 2.1: 2019 Class A, CISPR 35 Ed 1.0:2016, EN 60825-1:2014, IEC 60825-1:2014 Class 1, CISPR 35, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, EN 61000-3-2, EN 61000-3-3, IEC 61000-3-2, IEC 61000-3-3 |
|
| Dimensions & Weight |
| Width: |
44.2 cm |
|
| Depth: |
38.5 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
5.83 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
15 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
15 - 90% (non-condensing) |
|
German
English
French
Spanish
Italian
