| Highlights |
|---|
| Tipo di porta: |
Rame |
| Airflow: |
Fanless |
| POE Porti: |
POE+ |
| Velocità della porta: |
1G |
| Layer Type: |
Layer 3 |
| Numero di porte: |
8 |
| Uplink Ports (fixed): |
2x 1Gb RJ45/2x 10Gb SFP+ |
Informazioni sul prodotto:
| General |
| Device Type: |
Switch - 8 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
8 x 10/100/1000 (PoE+) + 2 x 1000Base-T + 2 x 10 Gigabit SFP+ (uplink) |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| PoE Budget: |
240 W |
|
| Performance: |
Switching capacity: 60 Gbps
Forwarding rate: 44.64 Mpps |
|
| Capacity: |
Virtual networks: 16
IPv4 routes: 14000
Direct IPv4 routes: 10000
Indirect IPv4 routes: 4000
IPv4 routing entries: 4000
IPv6 routing entries: 2000
Multicast scale: 1000
QoS scale entries: 1000
ACL scale entries: 1600
Flexible NetFlow entries: 16000
VLAN IDs: 4096
PVST instances: 128
STP Virtual Ports for PVST: 13000
STP Virtual Ports for MST: 13000
Switched virtual interfaces (SVIs): 1000
IP SGT binding scale: 8000
IPv4 bindings: 8000
SGT/DGT policies: 2000
SXP Sessions: 200
Flexible NetFlow entries: 16000
Buffer capacity (MB): 6 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, OSPFv3, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP, HSRP, IS-IS, MSDP, LISP, IS-ISv4 |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2c, SNMP 3, RMON 1, RMON 2, CLI, NETCONF, RESTCONF, YANG |
|
| Encryption Algorithm: |
256-bit AES |
|
| Features: |
Fanless, QoS, Rapid PVST+, SRR, PXE support, RSPAN, Energy Efficient Ethernet, MIB, CoS, FNF, 802.1x authentication, DSCP support, MACsec support, SPAN, EEM, PIM, FHS, PVLAN support, CIR, ACL support, Cisco UADP 2.0, built-in ASIC, NetFlow, EEE, Preboot Execution Environment, Cisco StackWise Technology, BSR Mechanism, VRF, VXLAN, SGT caching, MACsec, CoPP, ZTP |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.1s, IEEE 802.1w, IEEE 802.1p, IEEE 802.1x, IEEE 802.3ad (LACP), IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1ae, IEEE 802.3at, IEEE 802.3af, IEEE 802.3bt |
|
| RAM: |
4 GB |
|
| Flash Memory: |
8 GB |
|
| Built-in Devices: |
RFID tag |
|
| Status Indicators: |
Beaconing, status |
|
| Expansion / Connectivity |
| Interfaces: |
8 x 1000Base-T RJ-45 PoE+ - 30 W
2 x 1000Base-T RJ-45
2 x 10GBase-X SFP+ uplink
1 x USB 2.0 Type A
1 x console (micro-USB) Type B |
|
| Expansion Slots: |
1 (total) / 1 (free) x SD Memory Card |
|
| Power |
| Power Device: |
Internal power supply |
|
| Power Provided: |
315 Watt |
|
| Voltage Required: |
AC 100-277/ DC 120-418 V (50/60 Hz) |
|
| Features: |
High Voltage DC (HVDC) |
|
| Miscellaneous |
| Compliant Standards: |
Plug and Play, EN 61000-3-2, EN 61000-3-3, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35, EN 55035, EN 62368-1, IEC 62368-1, UL 62368-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS XE 17.9 Universal |
|
| Dimensions & Weight |
| Width: |
26.9 cm |
|
| Depth: |
24.4 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
2.99 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 90% (non-condensing) |
|
German
English
French
Spanish
Polish
