| Highlights |
|---|
| Layer Type: |
Layer 3 |
| POE Ports: |
UPOE |
| Nombre de ports: |
48 |
Informations sur le produit:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 (UPOE+) |
|
| Power Over Ethernet (PoE): |
UPOE+ |
|
| PoE Budget: |
822 W |
|
| Performance: |
Switching capacity: 256 Gbps
Stacking bandwidth: 736 Gbps
Forwarding rate: 190.48 Mpps
Forwarding rate with stacking: 547.62 Mpps |
|
| Capacity: |
IPv4 routing table entries: 32000
IPv6 routing table entries: 16000
Flexible NetFlow entries: 64000
VLAN IDs: 4000
Switched virtual interfaces (SVIs): 2000 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF |
|
| Encryption Algorithm: |
128-bit AES |
|
| Features: |
DHCP support, trunking, Syslog support, full duplex mode, SSO, CBWFQ, WRED, STP support, ACL support, QoS, NSR, RSPAN, MIB, Cisco StackWise-480 technology, Cisco StackPower technology, FNF, MSDP, 802.1x authentication, 16MB packet buffer, FTP client, MACsec support, 3 fans, CoPP, VXLAN, AVC, SSM, integrated Wireshark, VLAN Double Tagging (Q-in-Q), EoMPLS, H-VPLS, Private VLAN, L3VPN support, ERSPAN, SGT caching, SGACL, ITSM integration, third-party IPAM integration |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at |
|
| RAM: |
8 GB |
|
| Flash Memory: |
16 GB |
|
| Status Indicators: |
Status |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 1000Base-T RJ-45 UPOE+
1 x USB 2.0 |
|
| Expansion Slots: |
1 (total) / 1 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
1 |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Provided: |
1100 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Miscellaneous |
| MTBF: |
227,410 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco Network Essentials |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
48.8 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
7.72 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 90% (non-condensing) |
|
German
English
Spanish
Italian
Polish
