| Highlights |
| Tipo di porta: |
Rame |
| Layer Type: |
Layer 2 |
| Velocità della porta: |
10G |
| Numero di porte: |
48 |
| Uplink Ports (fixed): |
6x 100G QSFP28 |
Informazioni sul prodotto:
| General |
| Device Type: |
Switch - 54 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
100 Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000/10000 + 6 x 100 Gigabit QSFP28 |
|
| Performance: |
Routing/switching capacity: 2.16 Tbps Latency: Throughput: 1001.7 Mpps |
|
| Capacity: |
IPv4 routing table entries: 324000 IPv6 routing table entries: 162000 MAC address entries: 288000 |
|
| MAC Address Table Size: |
288K entries |
|
| Jumbo Frame Support: |
9416 bytes |
|
| Routing Protocol: |
OSPF, RIP, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMP, VRRP, OSPFv2, IGMPv3, OSPFv3, static IPv6 routing, ECMP, RIPng, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD), BGP+ |
|
| Remote Management Protocol: |
SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI |
|
| Authentication Method: |
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Flow control, DHCP support, BOOTP support, ARP support, VLAN support, IGMP snooping, Syslog support, packet filtering, port mirroring, DiffServ support, WRR queuing, IPv6 support, SNTP support, WFQ, sFlow, PIM snooping, STP support, RSTP support, VRRP support, MSTP support, tunnelling, DCBX support, DHCP snooping, ACL support, QoS, CAR, Jumbo Frames support, DLDP support, ECMP, IPv4 support, LLDP support, DHCP relay, LACP, Port Security, DCB, MIB, DHCP protection, NTP time synchronisation, FCoE forwarding, CoS, SP, IRF technology, redundant fans, reverse airflow support, SNMP support, cut-through, FCoE support, RoCE, ISSU, DRR, VTEP support, 32MB packet buffer, NTP, ICMP blocking, WDRR, ToR, 5 fan tray slots |
|
| Compliant Standards: |
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag |
|
| RAM: |
8 GB SDRAM |
|
| Flash Memory: |
4 GB |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10GBase-T 6 x 100Gbit LAN QSFP28/QSFP+ 1 x serial (console) RJ-45 1 x management (LAN) RJ-45 1 x USB 2.0 1 x management (LAN) SFP 1 x mini-USB 2.0 |
|
| Installed Modules Qty (Max): |
0 (installed) / 5 (max) |
|
| Power |
| Power Device: |
Internal power supply (not installed) - hot-plug |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Yes |
|
| Power Provided: |
320 Watt |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Power Consumption Operational: |
233 Watt |
|
| Power Consumption Stand by: |
102 Watt |
|
| Miscellaneous |
| Compliant Standards: |
CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, VCCI Class A, FCC CFR47 Part 15 A, FDA 21 CFR, EN 55032 Class A, CISPR 32 Class A, AS/NZS CISPR32:2013 Class A, ETSI EN 300 386, CAN/CSA C22.2 No. 60950-1 |
|
| Pricing Type: |
BTO |
|
| Dimensions & Weight |
| Width: |
44 cm |
|
| Depth: |
46 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
10 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 90% (non-condensing) |
|