| Highlights |
|---|
| Tipo di porta: |
Rame |
| Layer Type: |
Layer 3 |
| Velocità della porta: |
10G |
| Uplink Ports (fixed): |
4x 40G QSFP+ |
| Numero di porte: |
32 |
Informazioni sul prodotto:
| General |
| Device Type: |
Switch - 32 ports - L3 - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
32 x 10GBase-T + 4 x 40 Gigabit QSFP+ |
|
| Performance: |
Switching capacity: 1.28 Tbps
Forwarding performance: 950 Mpps |
|
| Capacity: |
Virtual interfaces (VLANs): 4096
Multiple Spanning Tree Protocol instances: 64
Rapid Spanning Tree Protocol instances: 512
OSPF routes: 256
ACL entries: 2000
QoS hardware queues: 8 |
|
| MAC Address Table Size: |
128K entries |
|
| Jumbo Frame Support: |
9216 bytes |
|
| Routing Protocol: |
RIP-2, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, static IP routing, IGMPv3, PIM-SSM, MSDP |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, SSH-2, CLI |
|
| Encryption Algorithm: |
AES |
|
| Authentication Method: |
RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2) |
|
| Features: |
DHCP support, trunking, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), EIGRP Stub Routing, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Class of Service (CoS), Multicast Source Discovery Protocol (MSDP) |
|
| Compliant Standards: |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3ba |
|
| Flash Memory: |
2 GB |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10Gbit LAN RJ-45
4 x 40Gbit WAN QSFP+
2 x management (Gigabit LAN) RJ-45
1 x serial (console) RJ-45
1 x USB Type A |
|
| Power |
| Power Device: |
Internal power supply (not installed) - hot-plug |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Miscellaneous |
| Compliant Standards: |
CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, RoHS, GB 4943, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300 386 |
|
| Software / System Requirements |
| Software Included: |
Cisco NX-OS Layer 3 Base Services |
|
| Dimensions & Weight |
| Width: |
43.9 cm |
|
| Depth: |
57 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
9.5 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 85% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
German
English
French
Spanish
Polish
