| Highlights |
|---|
| POE Porti: |
POE |
| Velocità della porta: |
10/100mbit |
| Tipo di porta: |
Rame |
| Layer Type: |
Layer 2 |
| Uplink Ports (fixed): |
2x 1G SFP2 x 1G RJ45 |
| Numero di porte: |
48 |
Informazioni sul prodotto:
| General |
| Device Type: |
Switch - 48 ports - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Fast Ethernet |
|
| Ports: |
48 x 10/100 (PoE) + 2 x Gigabit SFP + 2 x 10/100/1000 |
|
| Power Over Ethernet (PoE): |
PoE |
|
| PoE Budget: |
370 W |
|
| Performance: |
Switching capacity: 16 Gbps
Forwarding performance (64-byte packet size): 13.1 Mpps |
|
| Capacity: |
Active VLANs: 64 |
|
| Jumbo Frame Support: |
9018 bytes |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI |
|
| Authentication Method: |
RADIUS, TACACS+ |
|
| Features: |
Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, STP support, RSTP support, MSTP support, DHCP snooping, PAgP support, TFTP support, QoS, DAI, Cisco EnergyWise technology, SRR, LLDP support, DHCP relay, LACP, MAC Address Notification, MIB, CoS, DSCP support |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
|
| RAM: |
128 MB |
|
| Flash Memory: |
64 MB |
|
| Status Indicators: |
Port transmission speed, port duplex mode, system, status, RPS (Redundant Power Supply), PoE |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 100Base-TX RJ-45 PoE - 15.4 W
2 x SFP uplink
2 x 1000Base-T RJ-45 uplink |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Power Consumption Operational: |
51.1 Watt |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| MTBF: |
312,000 hours |
|
| Compliant Standards: |
CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS LAN Lite |
|
| Dimensions & Weight |
| Width: |
45 cm |
|
| Depth: |
33.2 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
5.4 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
10 - 95% (non-condensing) |
|
| General |
| Device Type: |
Switch - 48 ports - Managed |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
Fast Ethernet |
|
| Ports: |
48 x 10/100 (PoE) + 2 x SFP + 2 x 10/100/1000 |
|
| Power Over Ethernet (PoE): |
PoE |
|
| Performance: |
Switching capacity: 16 Gbps
Forwarding performance (64-byte packet size): 13.3 Mpps |
|
| MAC Address Table Size: |
8K entries |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH-2 |
|
| Encryption Algorithm: |
SSL |
|
| Authentication Method: |
RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Layer 2 switching, auto-sensing per device, DHCP support, PoE, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, RSTP support, MSTP support, DTP support, PAgP support, QoS, LACP, Port Security, MAC Address Notification |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
|
| RAM: |
64 MB |
|
| Flash Memory: |
32 MB |
|
| Status Indicators: |
Port status, port transmission speed, port duplex mode, power, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 100Base-TX RJ-45 PoE
2 x 1000Base-T RJ-45
1 x console RJ-45 management
2 x SFP (mini-GBIC) |
|
| Power |
| Power Device: |
Internal power supply |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Power Consumption Operational: |
52 Watt |
|
| Features: |
Redundant Power System (RPS) connector |
|
| Miscellaneous |
| Rack Mounting Kit: |
Optional |
|
| MTBF: |
181,979 hours |
|
| Compliant Standards: |
TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS LAN Lite |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
33.1 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
5.45 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-25 °C |
|
| Max Storage Temperature: |
70 °C |
|
| Humidity Range Storage: |
10 - 95% (non-condensing) |
|
German
English
French
Spanish
Polish
