| Highlights |
| Port Typ: |
Kupfer |
| POE Ports: |
POE+ |
| Port Geschwindigkeit: |
1G |
| Layer Typ: |
Layer 3 Light |
| Uplink Ports (fixed): |
4x 1G SFP |
| Portanzahl: |
48 |
Produktinformationen:
| Allgemein |
| Gerätetyp: |
Switch - 48 Anschlüsse - L3 - managed - stapelbar |
|
| Gehäusetyp: |
Desktop, an Rack montierbar 1U |
|
| Untertyp: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP |
|
| Power Over Ethernet (PoE): |
PoE+ |
|
| PoE-Budget: |
370 W |
|
| Leistung: |
Switching-Kapazität: 216 Gbps Weiterleitungsleistung (Paketgröße 64 Byte): 107.1 Mpps |
|
| Kapazität: |
Virtuelle Schnittstellen (VLANs): 1023 |
|
| Jumbo-Rahmenunterstützung: |
9216 Byte |
|
| Max. Einheiten pro Stack: |
8 |
|
| Routing Protocol: |
OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, Policy-Based Routing (PBR), RIPng |
|
| Remoteverwaltungsprotokoll: |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI |
|
| Authentifizierungsmethode: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Leistungsmerkmale: |
Layer 2 switching, PoE, Auto-Negotiation, ARP-Unterstützung, Cisco Fast EtherChannel, VLAN-Unterstützung, Auto-Uplink (Auto MDI/MDI-X), IGMP Snooping, IDS, Broadcast Storm Control, IPv6-Unterstützung, Multicast Storm Control, Unicast Storm Control, RSTP-Unterstützung, MSTP Support, DHCP-Snooping, DTP-Unterstützung, PAgP-Unterstützung, TFTP Support, ACL Support, QoS, RADIUS-Unterstützung, SSH-Unterstützung, Jumbo-Frames-Support, MLD-Snooping, DAI, PoE+, Cisco EnergyWise-Technologie, UDLD, Rapid PVST+, IPv4-Unterstützung, SRR, LACP, MAC Address Notification, RSPAN, Layer 3-Lastausgleich, PVRST, NetFlow, HSRP-Unterstützung, Energy Efficient Ethernet, MVR, SPQ, CoS, Cisco FlexStack Plus |
|
| Produktzertifizierungen: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX |
|
| Prozessor: |
: 600 MHz |
|
| RAM: |
512 MB |
|
| Flash-Speicher: |
128 MB |
|
| Statusanzeiger: |
Port Status, Anschluß-Übertragungsgeschwindigkeit, Anschluß-Duplexmodus, System, RPS (redundantes Netzteil), PoE, Link/Aktivität |
|
| Erweiterung/Konnektivität |
| Schnittstellen: |
48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 12 Ports (PoE+)/48 Ports (PoE) - 30 W 1 x Konsole SFP (mini-GBIC) - RJ-45 1 x mini-USB Type B Management 2 x USB Type A 1 x 1000Base-TX RJ-45 Management 4 x SFP Uplink |
|
| Erweiterungssteckplätze: |
1 (gesamt)/ 1 (frei) x Stapelmodul |
|
| Stromversorgung |
| Stromversorgungsgerät: |
Internes Netzteil |
|
| Installierte Anzahl: |
1 |
|
| Max. unterstützte Anzahl: |
2 |
|
| Redundante Stromversorgung: |
Optional |
|
| Plan für redundante Stromversorgung: |
1+1 (mit optionaler Stromversorgung) |
|
| Gestellte Leistung: |
640 Watt |
|
| Erforderliche Netzspannung: |
Wechselstrom 120/230 V (50/60 Hz) |
|
| Besonderheiten: |
Anschluss für Redundant Power System (RPS) |
|
| Verschiedenes |
| MTBF: |
274,380 Stunden |
|
| Produktzertifizierungen: |
CISPR 22 Klasse A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Klasse A, AS/NZS 60950-1, ICES-003 Klasse A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386 |
|
| Software / Systemanforderungen |
| Software inbegriffen: |
Cisco IOS IP Lite |
|
| Maße und Gewicht |
| Breite: |
44.5 cm |
|
| Tiefe: |
40.8 cm |
|
| Höhe: |
4.45 cm |
|
| Gewicht: |
6.4 kg |
|
| Umgebungsbedingungen |
| Min Betriebstemperatur: |
-5 °C |
|
| Max. Betriebstemperatur: |
45 °C |
|
| Zulässige Luftfeuchtigkeit im Betrieb: |
10 - 95% (nicht kondensierend) |
|
| Min. Lagertemperatur: |
-25 °C |
|
| Max. Lagertemperatur: |
70 °C |
|
| Zulässige Luftfeuchtigkeit bei Lagerung: |
10 - 95% (nicht kondensierend) |
|