| Highlights |
|---|
| Tipo di porta: |
Fibra di vetro |
| Layer Type: |
Layer 3 |
| Velocità della porta: |
10G |
| Numero di porte: |
16 |
| Uplink Ports (fixed): |
4x 10G SFP+ Option |
Informazioni sul prodotto:
| General |
| Device Type: |
Switch - 16 ports - L3 - Managed - stackable |
|
| Enclosure Type: |
Desktop, rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
12 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 10 Gigabit SFP+ (uplink) |
|
| Performance: |
Switching capacity: 320 Gbps
Stacking bandwidth: 480 Gbps |
|
| Capacity: |
IPv4 routes: 24000
NetFlow entries: 24000
Virtual interfaces (VLANs): 4000
Switched virtual interfaces (SVIs): 1000
Wireless LANs: 64 |
|
| MAC Address Table Size: |
32000 entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
IS-IS, RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, policy-based routing (PBR), RIPng, MLDv2, MLD |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
|
| Authentication Method: |
Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
|
| Features: |
DHCP support, ARP support, Syslog support, PIM snooping, MSTP support, DHCP snooping, DTP support, PAgP support, TFTP support, ACL support, QoS, SSH support, VRF-Lite, UDLD, Rapid PVST+, SRR, LACP, RSPAN, Energy Efficient Ethernet, VRF, Cisco StackWise-480 technology, Cisco StackPower technology, FNF, 802.1x authentication, RRM, ARP inspection, WTD, VTP, BPDU, CoPP |
|
| Compliant Standards: |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
|
| RAM: |
4 GB |
|
| Flash Memory: |
4 GB |
|
| Status Indicators: |
Port transmission speed, port duplex mode, power, system, active, status |
|
| Expansion / Connectivity |
| Interfaces: |
12 x 10GBase-X SFP+
4 x 10GBase-X SFP+ uplink
1 x USB Type A
1 x management (mini-USB) Type B
1 x console RJ-45 management
1 x management (Gigabit LAN) RJ-45
2 x network stack device |
|
| Expansion Slots: |
1 (total) / 0 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply |
|
| Installed Qty: |
1 |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Power Provided: |
350 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Miscellaneous |
| MTBF: |
371,440 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
45 cm |
|
| Height: |
4.45 cm |
|
| Weight: |
5.8 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
-5 °C |
|
| Max Operating Temperature: |
45 °C |
|
| Humidity Range Operating: |
10 - 95% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
70 °C |
|
German
English
French
Spanish
Polish
