| Highlights |
|---|
| Port Type: |
Fiber |
| Layer Type: |
Layer 3 |
| Port Speed: |
10G |
| Number of Ports: |
48 |
| Uplink Ports (fixed): |
8 x 10G SFP+ Option |
Product information:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed - stackable - with Cisco Catalyst 9500 8 x 10GE Network Module (C9500-NM-8X) |
|
| Enclosure Type: |
Rack-mountable 1U |
|
| Subtype: |
10 Gigabit Ethernet |
|
| Ports: |
48 x 10 Gigabit SFP+ |
|
| Performance: |
Switching capacity (full duplex): 480 Gbps
Forwarding rate: 720 Mpps |
|
| Capacity: |
Indirect IPv4 routes: 64000
Host IPv4 routes: 32000
Indirect IPv6 routes: 32000
Host IPv6 routes: 16000
Multicast scale: 48000
QoS ACL scale: 18000
Security ACL scale: 18000
FNF entries: 512000
VLAN IDs: 4000
Switched virtual interfaces (SVIs): 4000 |
|
| MAC Address Table Size: |
64K entries |
|
| Jumbo Frame Support: |
9198 bytes |
|
| Routing Protocol: |
OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, policy-based routing (PBR), RIPng |
|
| Remote Management Protocol: |
SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, NETCONF, RESTCONF |
|
| Encryption Algorithm: |
256-bit AES |
|
| Features: |
NAT support, IPv6 support, Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, MLD snooping, Non-Stop Routing (NSR), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Virtual Routing and Forwarding (VRF), Flexible NetFlow (FNF), 802.1x authentication, MACsec support, Control plane protection (CoPP), VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, Zero-touch provisioning (ZTP), CoAP support, secure boot, Switched Port Analyzer (SPAN), Cisco StackWise Virtual, First Hop Security (FHS) |
|
| Compliant Standards: |
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba |
|
| Processor: |
1: 2.4 GHz |
|
| RAM: |
16 GB |
|
| Flash Memory: |
16 GB |
|
| Built-in Devices: |
RFID tag |
|
| Status Indicators: |
Status |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 10GBase-X SFP+ |
|
| Expansion Slots: |
1 (total) / 0 (free) x Expansion Slot |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
2 (installed) / 2 (max) |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 |
|
| Power Provided: |
950 Watt |
|
| Voltage Required: |
AC 120/230 V (50 - 60 Hz) |
|
| Features: |
Front-to-rear air?ow |
|
| Miscellaneous |
| MTBF: |
180,640 hours |
|
| Compliant Standards: |
CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR22:2004 Class A, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, EN 300 386, KN 61000-4, CAN/CSA-C22.2 No. 60950-1 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS Universal, Cisco ONE Advantage High Term |
|
| Dimensions & Weight |
| Width: |
44.5 cm |
|
| Depth: |
54.7 cm |
|
| Height: |
4.39 cm |
|
| Weight: |
11.68 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
5 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-20 °C |
|
| Max Storage Temperature: |
65 °C |
|
| Humidity Range Storage: |
5 - 95% (non-condensing) |
|
German
French
Spanish
Italian
Polish
