| Highlights |
|---|
| Port Type: |
Copper |
| Port Speed: |
1G |
| Layer Type: |
Layer 3 |
| Uplink Ports (fixed): |
4x 1G4x 10G |
| Number of Ports: |
48 |
Product information:
| General |
| Device Type: |
Switch - 48 ports - L3 - Managed |
|
| Enclosure Type: |
Back to front airflow rack-mountable 1U |
|
| Subtype: |
Gigabit Ethernet |
|
| Ports: |
48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
|
| Performance: |
Switching capacity: 176 Gbps
IPv4 switching: 131 Mpps
IPv6 switching: 110 Mpps |
|
| Capacity: |
Active VLANs: 4094
QoS hardware entries: 32000
Spanning Tree Protocol instances: 4094
Switched virtual interfaces (SVIs): 4094 |
|
| MAC Address Table Size: |
55K entries |
|
| Routing Protocol: |
RIP-1, RIP-2, EIGRP, IGMPv2, HSRP, IGMP, DVMRP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, MLDv2, MLD |
|
| Remote Management Protocol: |
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS, TFTP, SSH, SSH-2, CLI |
|
| Authentication Method: |
Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
|
| Features: |
Hot swap module replacement, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, VLAN support, IGMP snooping, traffic shaping, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, NSF, STP support, PVST, tunnelling, DHCP snooping, DTP support, PAgP support, ACL support, QoS, Jumbo Frames support, VRF-Lite, MLD snooping, DAI, TDR, PVST+, EIGRP Stub Routing |
|
| Compliant Standards: |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag |
|
| Processor: |
1: 1 GHz |
|
| RAM: |
1 GB SDRAM |
|
| Status Indicators: |
Port status, power, link OK, system, link/activity |
|
| Expansion / Connectivity |
| Interfaces: |
48 x 1000Base-T RJ-45
4 x SFP+ |
|
| Power |
| Power Device: |
Internal power supply - hot-plug |
|
| Installed Qty: |
1 |
|
| Max Supported Qty: |
2 |
|
| Power Redundancy: |
Optional |
|
| Power Redundancy Scheme: |
1+1 (with optional power supply) |
|
| Voltage Required: |
AC 120/230 V (50/60 Hz) |
|
| Miscellaneous |
| MTBF: |
149,261 hours |
|
| Compliant Standards: |
NEBS level 3, ETSI, CISPR 22 Class A, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN50082-1, AS/NZ 3548 Class B, EMC, ICES-003 Class A, RoHS, FCC CFR21 Part 1040, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A, IEC 60825-1, CSA C22.2 No. 60950-1, EN 60825-1, EN 55022 Class A, EN 300 386 |
|
| Software / System Requirements |
| Software Included: |
Cisco IOS IP Base |
|
| Dimensions & Weight |
| Width: |
44.4 cm |
|
| Depth: |
49.3 cm |
|
| Height: |
4.4 cm |
|
| Weight: |
8.6 kg |
|
| Environmental Parameters |
| Min Operating Temperature: |
0 °C |
|
| Max Operating Temperature: |
40 °C |
|
| Humidity Range Operating: |
10 - 90% (non-condensing) |
|
| Min Storage Temperature: |
-40 °C |
|
| Max Storage Temperature: |
75 °C |
|
German
French
Spanish
Italian
Polish
